 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| NUF2101M USB Filter with ESD Protection This device is designed for applications requiring Line Termination, EMI Filtering and ESD Protection. It is intended for use in downstream USB 1.1 ports, Cellular phones, Wireless equipment and computer applications. This device offers an integrated solution in a small package (TSOP-6, Case 318G) reducing PCB space and cost. Features: http://onsemi.com SCHEMATIC D+OUT 1 15 k VBUS 2 15 k D-OUT 3 D-IN 4 5 RS D+IN 6 * Provides USB Line Termination, Filtering and ESD Protection * Single IC Offers Cost Savings by Replacing 4 Resistors, * EMI Filtering Prevents Noise from Entering/Leaving the System * IEC61000-4-2 (Level 4) * * 8 kV (Contact) 15 kV (Air) ESD Ratings: Machine Model = C Human Body Model = 3B Pb-Free Package is Available 2 Capacitors, and 5 TVs diodes Benefits: * TSOP-6 Package Minimizes PCB Space * Integrated Circuit Increases System Reliability versus Discrete * TVs Devices Provide ESD Protection That is Better than a Discrete Implementation because the Small IC minimizes Parasitic Inductances Typical Applications: 1 TSOP-6 CASE 318G STYLE 10 Component Implementation MARKING DIAGRAM 6VMG G 1 * USB Hubs * Computer Motherboards MAXIMUM RATINGS (TA = 25C) Rating Steady State Power Maximum Junction Temperature Operating Temperature Range Storage Temperature Range Lead Solder Temperature (10 second duration) Symbol PD TJ(max) TJ Tstg TL Value 225 125 -55 to +125 -55 to +125 260 Unit mW C C C C 6V M = Specific Device Code = Date Code G = Pb-Free Package (Note: Microdot may be in either location) ORDERING INFORMATION Device NUF2101MT1 NUF2101MT1G Package TSOP-6 TSOP-6 (Pb-Free) Shipping 3000/Tape & Reel 3000/Tape & Reel Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D. (c) Semiconductor Components Industries, LLC, 2005 August, 2005 - Rev. 1 1 Publication Order Number: NUF2101M/D NUF2101M ELECTRICAL CHARACTERISTICS (TA = 25C) VBR @ 1 mA (Volts) Device NUF2101MT1 NUF2101MT1G Device Marking 6V 6V VRWM (Volts) 5.25 5.25 Min 6.0 6.0 Max 8.0 8.0 Max IR @ VRWM = 5.25 V VBUS to GND (mA) 1.0 1.0 Max IR @ VRWM = 3.3 V VBUS Pin (mA) 0.1 0.1 Series Resistor RS (W) (Note 1) Min 26.3 26.3 Nom 30 30 Max 33.7 33.7 Min 13 13 Pulldown Resistor Rpd (kW) Nom 15 15 Max 17 17 Typical Line Capacitance (pF) (Notes 2, 3) 55 55 1. For other RS values (i.e. RS = 30 W) contact your local ON Semiconductor sales representative. 2. Measured at 25C, VR = 0 V, f = 1 MHz, Pins 2, 3, 4 or 5 to GND with Pin 1 also grounded. 3. For other capacitance values contact your local ON Semiconductor sales representative. http://onsemi.com 2 NUF2101M TYPICAL CHARACTERISTICS 0 -5 -10 S21 (dB) -15 -20 -25 -30 -35 1 10 100 1000 FREQUENCY (MHz) 10000 S41 (dB) 0 -10 -20 -30 -40 -50 -60 10 100 1000 FREQUENCY (MHz) 10000 Figure 1. Insertion Loss Characteristics Figure 2. Analog Cross-Talk 33 32 31 RS 30 29 28 27 -35 16500 16000 15500 Rpd 5 45 25 TEMPERATURE (C) 85 15000 14500 14000 13500 -35 -15 65 -15 5 45 25 TEMPERATURE (C) 65 85 Figure 3. RS vs. Temperature Figure 4. Rpd vs. Temperature 58 56 CAPACITANCE (pF) 54 52 50 48 46 44 42 40 0 1 2 3 Vr, REVERSE VOLTAGE (V) 4 Figure 5. Typical Capacitance http://onsemi.com 3 NUF2101M PACKAGE DIMENSIONS TSOP-6 CASE 318G-02 ISSUE P D NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL. 4. DIMENSIONS A AND B DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR GATE BURRS. DIM A A1 b c D E e L HE q MIN 0.90 0.01 0.25 0.10 2.90 1.30 0.85 0.20 2.50 0 MILLIMETERS NOM MAX 1.00 1.10 0.06 0.10 0.38 0.50 0.18 0.26 3.00 3.10 1.50 1.70 0.95 1.05 0.40 0.60 2.75 3.00 10 - MIN 0.035 0.001 0.010 0.004 0.114 0.051 0.034 0.008 0.099 0 INCHES NOM 0.039 0.002 0.014 0.007 0.118 0.059 0.037 0.016 0.108 - MAX 0.043 0.004 0.020 0.010 0.122 0.067 0.041 0.024 0.118 10 HE 6 1 5 2 4 3 E b e c L q 0.05 (0.002) A1 A STYLE 10: PIN 1. D(OUT)+ 2. GND 3. D(OUT)- 4. D(IN)- 5. VBUS 6. D(IN)+ SOLDERING FOOTPRINT* 2.4 0.094 1.9 0.075 0.95 0.037 0.95 0.037 0.7 0.028 1.0 0.039 SCALE 10:1 mm inches *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: N. American Technical Support: 800-282-9855 Toll Free Literature Distribution Center for ON Semiconductor USA/Canada P.O. Box 61312, Phoenix, Arizona 85082-1312 USA Phone: 480-829-7710 or 800-344-3860 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center 2-9-1 Kamimeguro, Meguro-ku, Tokyo, Japan 153-0051 Fax: 480-829-7709 or 800-344-3867 Toll Free USA/Canada Phone: 81-3-5773-3850 Email: orderlit@onsemi.com ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder For additional information, please contact your local Sales Representative. http://onsemi.com 4 NUF2101M/D |
Price & Availability of NUF2101MT1G
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |